Haier washing machine error codes

Haier Front-Load Washer Codes – A Guide to Errors

So, error codes. Every machine’s got them, and there’s no doubt that they’re a severe pain. However, they don’t have to be the end of the world, and there are things you can do to prep for them. We’re going to be looking at the error codes for this particular brand of the machine so that you can know what to do immediately.

Error Code ‘bLoC PunP’

This fault code, while spelt strangely, is also one which points to a blocked pump, as you might have been able to infer. Check for any blockage or obstruction, and make sure that you’re searching carefully for problems because they might be there and an easy fix.

Error Code ‘no tAPS’

These fault messages are going to look a little weird, so you’ll need to get used to it. This code tells you that the washing machine isn’t filling with water, so that’s something you need to look into quickly. During the winter, you’ll also want to check the fill points for signs of freezing.

Codes ‘Err7’ and ‘Err8’

We’re going to group these two because they’re so similar regarding the name. Err7 points to a motor speed problem, and Err8 is telling you that the washer is overfilled with water. If these two problems persist, come to us, and we’ll help sort it.

Error Messages ‘ErLC or ErUL’

Now we’re moving into new territories because these two codes all point to a failure with the door lock. You should check to see if there are any issues with the connection for the doors and make sure there are no obstructions.

Fault Code ‘EUAr’

This code tells us that there’s a communication failure between the power board and the display board. You should look for loose connections because this can sometimes be the cause.

Error Code Unb

This code is something that you can fix pretty easily because it tells you there’s not a balanced load of washing. Just take some of the wash and move it around until it’s stable again.

Error Code PF

The error code PF means that the supply voltage for the machine is less than what is accepted as being safe parameters. You should look and make sure that there are no loose connections because they can be problematic.

Fault Code ClRf

This fault code means that you’re going to need to watch out in future because there’s too many suds in the machine. Just cut back on the detergent which you use, and you won’t have any problems.

All in all, these are the error codes which you’re likely to run up against. They all point to different things, but they’re also nothing that we at Just Fixed can’t handle if you need professional help! However, it’s also helpful for you to know what the error codes mean so that if you ever need just to shut the machine down and walk away from it, you can.